Current Position:Home > NEWS > Engineering Release
Engineering Release

Commonly used cnc processing g codes

Author:    Release time:2020-10-26   Browse:

In daily mechanical processing, cnc processing equipments are often used, so what are the most commonly used cnc processing g codes? SWKD has been engaged in cnc machining for many years, and we would like to share with you the cnc processing g codes:


   The code name and corresponding function are briefly described as follows:   

G00------Quickly locate du position   

G01------Linear interpolation   

G02------clockwise circular interpolation   

G03------Counterclockwise circular interpolation   

G04------Timed pause   

G05------Circular interpolation through the intermediate point   

G07------Z spline curve interpolation   

G08------Feed acceleration   

G09------Feed deceleration   

G20------Subroutine call   

22------Radius dimension programming mode   

G220-----Use on the system operation interface

G23------diameter size programming mode   

G230-----Use on the system operation interface

G24------End of subroutine   

25------Jump processing   

G26------Cycle processing   

G30------Magnification cancellation   

G31------Multiplication definition   

G32------Equal pitch thread cutting, inch system   

G33------Equal pitch thread cutting, metric system   

G53, G500-Set workpiece coordinate system to cancel   

G54------Set workpiece coordinate system one   

G55------Set the workpiece coordinate system 2   

G56------Set the workpiece coordinate system three   

G57------Set the workpiece coordinate system four   

G58------Set the workpiece coordinate system five   

G59------Set the workpiece coordinate system six   

G60------accurate path method   

G64------Continuous path mode   

G70------Inch size inch   

G71------Metric size mm   

G74------Return to reference point (machine zero point)   

G75------Return to the zero point of programmed coordinate   

G76------Return to the starting point of programmed coordinates   

G81------External fixed cycle   

G331-----Thread canned cycle   

G90------absolute size   

G91------ relative size   

G92------Prefabricated coordinates   

G94------Feed rate, feed per minute   

G95------ feed rate, feed per revolution

More + More + More +
  • Industry News
  • Company News
  • Engineering Release
Copyright ©2020 All Rights Reserved Shenzhen SWKD Precision Industry Co.,ltd        
QQ
Skype
Quotation
Scan it


Scan it Add WeChat

Quote Hotline
138 2520 1936

Back to top